Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for Brockton Homeowners
Most chimney problems in Brockton announce themselves the way a bad tooth does: slowly, then all at once. A fire that drafts poorly, a stain spreading across the ceiling near the flue, a faint smoky smell in July. A proper inspection finds the cause before it becomes a repair bill. Our technicians have up to 9 years of experience, and our customers’ feedback is one reason people call us back when a chimney acts up. We answer 24/7, and we can often book a same-day visit around Brockton. Call (877) 704-4074 to get on the schedule.
Fireplace Inspection
A Fireplace Inspection covers the firebox, damper, smoke chamber, and the visible flue from the hearth, which is often where the first real clues show up. You need one before the first burn of the season, after a chimney fire, or whenever a fire stops drafting the way it used to. We run the inspection the same visit as the sweep, so there’s no separate appointment to chase down. Typical cost in Brockton runs $180 to $340 depending on how many flues and how much access is involved. The written estimate sets the final price, and nothing is recommended without camera evidence you can see for yourself.
What a Firebox Check Covers
We look at the firebox panels for cracks, the damper for a tight seal, and the smoke shelf for creosote buildup. Each of these affects how a fire draws and how much smoke comes back into the room. Anything found is photographed and shown to you before we talk about next steps.
Creosote and Soot in the Smoke Chamber
The smoke chamber above the damper is often where glazed creosote hides, and it’s hard to see without a light and a mirror. We check that shelf and the chamber walls for buildup that could catch during a hot fire. If it’s a light layer, a sweep handles it. If it’s glazed, we say so plainly and quote the remedy.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Inspection Services
Chimney Inspection Services from Chimney Sweep Brockton are built to give you a clear picture in one visit. Inspection, sweeping, and repair all fall under the same roof, so you aren’t handed off to a second contractor once something turns up. We inspect before and after every sweep, and we bring the camera and tools needed to look at the parts of the flue you can’t see from the hearth. Cost depends on scope: a routine check runs $180 to $340, and camera work or a level 2 review adds to that. The written estimate sets the final price, and we talk through findings before any work is booked.
What’s Included in Every Visit
Every inspection includes a visual check from the firebox to the cap, a look at the damper and firebox, and a check of the exterior where safe access exists. We photograph what we find and review it with you at the end. If we spot something that can safely wait, we say that, too.

When to Book Rather Than Wait
Book an inspection if you’ve just bought the house, moved in, or haven’t had the chimney checked in the past year of regular burning. Also book if you notice a smell, a stain, or a draft change. Small symptoms are cheaper to diagnose than to fix later.

Chimney Flue Inspection
A Chimney Flue Inspection focuses on the flue itself – the passage the smoke travels through – and checks its condition from top to bottom. You need one whenever the flue has been through a fire, has an unknown history, or shows signs of liner damage like flaking tile or a rough, pitted surface. We use a camera where the flue isn’t visible from the hearth, and we look at the liner joints, cap, and crown from the roof. A focused flue inspection typically starts around $180 to $340 depending on access and camera needs. The written estimate sets the final price before anything is booked.
Visual Flue Check
We look at the liner from the inside for cracking, gaps between tiles, and missing mortar at the joints. The cap and crown get the same attention because water and animals enter through them just as easily as through the top of the flue. Anything we find gets photographed and explained.
Checking the Liner Joints
Liner joints are where flue gases slip out of the passage and into the structure of the house, so we check them carefully. If a joint is compromised, we show it to you on the camera and say what’s needed to make it safe. Nothing gets replaced unless the evidence supports it.
Chimney Fire
A Chimney Fire happens when creosote in the flue ignites, and it can burn hot enough to crack tiles or distort a metal liner before anyone inside notices more than a low roar. You need an inspection after any suspected chimney fire, even one that seemed small or self-extinguished, because damage often shows up in the flue and not in the room. We inspect the flue with a camera and check for tile damage, liner distortion, and smoke chamber scarring. A post-fire inspection typically runs $180 to $340 depending on the level of review needed. Call (877) 704-4074 before turning the fire on again.
How a Chimney Fire Starts
Creosote builds up from incomplete combustion: damp wood, restricted air, or a flue that’s too cool. When that layer gets thick enough, a hot ember can light it. Regular sweeps are the main defense, since they remove the fuel before it builds.
What to Do After One
Stop using the fireplace, and have the flue inspected before lighting another fire. Damage inside a liner isn’t always visible from the room. We check for cracks, gaps, and distortion, and we tell you plainly whether the chimney is safe to use.
Level 2 Chimney Inspection
A Level 2 Chimney Inspection is the standard inspection used whenever a property changes hands, a new appliance is added, or a chimney has been through a fire or earthquake. It goes beyond a visual check with camera work inside the flue, plus inspection of accessible portions of the chimney exterior and attic where the flue passes through. We photograph findings and review them with you. Pricing depends on flue count and access, and falls within our $180 to $340 range for many residential cases, moving upward with complexity. The written estimate sets the final price.
When a Level 2 Is Required
A Level 2 is called for when a home is sold, when a different appliance is connected, or after a fire or other event that could damage the flue. Many home inspectors recommend one on purchase for that reason. We can complete it as part of a routine sweep visit.
What Additional Access Adds
Access to the attic and any chimney chase lets us see the flue from angles the firebox view misses. It also reveals water intrusion or clearances that were never right. We ask about access before we arrive so the visit doesn’t stall.
Chimney Leak
A Chimney Leak shows up as a stain on the ceiling or wall near the flue, a rusted damper, or water pooling in the firebox – and it usually comes from the top, not from the flue itself. You need an inspection when water appears near the chimney, after a major storm, or when the cap or crown looks worn. We check the crown, flashing, cap, and masonry for cracks and gaps, and we photograph each finding. Leak diagnostics typically start around $180 to $340 depending on how much of the chimney has to be examined. The written estimate sets the final price, and we won’t quote a rebuild unless the evidence calls for one.
Finding the Source
Water can enter at the cap, at the crown, through the flashing around the chimney, or through cracked masonry. Each has a different fix, so we don’t guess. We trace the path and show you where it’s coming from.
Why Delaying Costs More
Water damages mortar, rusts dampers, and can reach framing if the leak goes long enough. Clearing it up early is cheaper than rebuilding the crown or flashing later. We quote the repair honestly and say when a fix can safely wait.
Chimney Camera Inspection
A Chimney Camera Inspection puts a video scope down the flue so you can see what’s actually inside it, from the firebox to the top of the chimney. You need one whenever the flue has an unknown history, after a fire, or any time a visual check shows something that needs a closer look. We record what the camera sees and review it with you in the room. Camera work typically adds to a standard inspection and falls around $180 to $340 depending on the flue and how much of the run needs to be recorded. The written estimate sets the final price before booking.
What the Camera Shows
The camera reveals cracks, gaps at liner joints, missing mortar, and creosote that builds in places a brush misses. It also uncovers the flue’s shape – some flues aren’t straight, and the camera shows where they bend. We point out anything that matters while you watch.
Recording What We Find
We record the run so you have a record of the flue’s condition. That record is useful later if you sell the house or need to show the state of the chimney at a given point. We keep the footage simple and walk you through it.
Brands We Service
We work with recognized brands in the industry, so homeowners can research exactly what goes into the chimney. DuraFlex flexible flue liners are part of our relining work, and we apply HeatShield resurfacing products when the flue needs structural restoration beyond a cleaning. We source caps, covers, and venting from Gelco and Famco for full-system coverage from the firebox to the cap. And we use Olympia Chimney and Copperfield components in our repair and installation work as well. Every product we name is one we’ve worked with, and the brand on the label is the brand that gets installed.
Brand familiarity makes diagnosis faster. We know where a DuraFlex liner tends to wear, where a HeatShield surfacing job needs to be rechecked, and where caps and venting from Gelco or Famco tend to fail under Brockton’s climate. Whether you have DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, Copperfield, or any other make, we can help. We name the brands we use – look them up, ask questions, and hold us to the standard.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- A roaring sound from the flue during a fire. That low rushing rumble can be a chimney fire already burning in the flue. Stop the fire, get everyone out, and call us to inspect before lighting it again.
- A smoky smell in the room that won’t clear. Smoke coming back into the room or lingering long after the fire is out points to a draft or blockage issue. It’s worth a look before the next burn.
- Water stains or rust near the flue. Staining on the ceiling or rust on the damper usually means water is getting in from the top. The sooner it’s traced, the less damage it does.
- Cracks in the firebox or visible flue tiles. Even hairline cracks can let heat or gas reach the structure of the house. We check the full flue rather than just the visible part.
- Creosote buildup you can see or smell. A thick, glossy layer inside the flue is fuel waiting for a spark. A sweep removes it; a camera check confirms the liner behind it is sound.
Our Process, Step by Step
- 1
Book the visit. We ask about the chimney’s history, the kind of fire you burn, and any symptoms you’ve noticed. That sets the right level of inspection before we arrive.
- 2
Sweep and prepare. We protect the room, then clean the flue and firebox so the camera and light can see clearly. Sweeping first means the inspection isn’t looking through a layer of soot.
- 3
Inspect with the camera and from the roof where safe. We use a video scope inside the flue and inspect the exterior, cap, and crown where access is safe. The camera reveals what a mirror can’t, and the roof check catches exterior damage the flue view misses.
- 4
Review findings with you. We show you what the camera recorded and talk through each finding, including what’s urgent and what can wait. You leave the visit with a clear picture and no pressure to book the next step.
- 5
Quote the repair if needed. If something needs fixing, we give a written estimate from recognized brands we can name. Repairs and the sweep are handled by the same team, so you don’t have to find a second contractor.
How Much Does Chimney Inspection Cost in Brockton?
A standard chimney inspection in Brockton typically runs $180 to $340, depending on the number of flues, access, and whether camera work is needed. A level 2 inspection, which adds camera review and attic access, tends to land at the higher end of that range for a single-flue home. A flue liner inspection or focused camera check starts around the same floor. The written estimate you receive before booking sets the final price.
Several things move the number: how many flues the chimney has, whether the chimney is capped or has a complex crown, and how much of the flue needs camera coverage. Access to the roof and attic matters too. When those are easy to reach, the visit stays in the lower part of the range. What we don’t do is add fees for things you didn’t approve – the estimate is itemized, and nothing appears on the bill that wasn’t quoted.
You avoid overpaying by asking for the camera footage and a written estimate before any repair is approved. If a seller’s inspection report lists repairs, ask for photos showing each one; we provide ours the same visit. Our estimate is free, and the price you see is set per job by that written estimate – not by an hourly guess.
A free estimate includes a visual check, a review of your symptoms, and a clear recommendation on whether a camera inspection is needed. Call (877) 704-4074 to ask for the estimate – estimates are free.
Our Service Area Near Brockton
We work with homeowners across Brockton and nearby towns. If you’re in Norton Center, North Pembroke, North Lakeville, South Duxbury, North Plymouth, North Seekonk, Somerset, Fall River, or Abington, the drive is straightforward, and most visits book within a day or two. Our chimney sweep brockton page covers the sweep that pairs with an inspection. If you’re in Norton Center and want the full sweep-and-inspection sequence, that’s a natural next read.
Serving Brockton, MA – Our Local Coverage Area
We serve Brockton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Inspection in Brockton
A chimney inspection is a look at the condition of the flue, firebox, damper, cap, and crown to confirm the chimney is safe to use. It goes beyond a sweep: the sweeping removes creosote, and the inspection checks what’s underneath. We photograph findings and walk you through each one, and any recommended work comes with camera evidence you can see.
Most standard inspections take about an hour for a single-flue home. A level 2 inspection that includes attic access and camera review can take longer, especially if the chimney has multiple flues. We tell you the expected time when you book so you can plan the visit.
A typical chimney inspection in Brockton runs $180 to $340 depending on flue count, access, and camera needs. A level 2 with attic access tends to sit at the higher end. The written estimate sets the final price, and estimates are free. Call (877) 704-4074 for an exact quote – estimates are free.
Yes. We work with DuraFlex flexible liners, HeatShield resurfacing products, Gelco, Olympia Chimney, Famco, and Copperfield components. We name the brands so you can look them up and see what’s going into your chimney. If you have a different make, we can help with that too.
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. A call outside dispatch hours is booked into the next opening. Same-day service is often possible around Brockton when the schedule allows.
We stand behind our inspection findings and the repair work that follows. We don’t claim a specific warranty term until the business has confirmed it, so ask about coverage when you book. The written estimate lists what’s included, and we’re glad to go over it with you before you approve any work.
Clear the area around the fireplace and make sure a path to the hearth is open. If you have a wood stove, let the fire go cold for at least 24 hours before the visit. If there’s attic access to the chimney chase, let us know so we can use it for the level 2 inspection.
Schedule Your Chimney Inspection Service in Brockton Today
If your chimney has an unknown history, has been through a fire, or is showing water stains or draft problems, a proper inspection gives you a clear answer before the next burn. We inspect, sweep, and repair as one team, and we name the brands we use so you can verify them. Call (877) 704-4074 for a no-obligation estimate. We answer 24/7.
Written by the team at Chimney Sweep Brockton.